Glossy Carbon Fiber Bike Stem

          Carbon fiber is mainly composed of carbon element . Its main purpose is to composite resin, metal, ceramic with carbon which as a reinforcing material to manufacture advanced composite materials. The specific strength and specific modulus of carbon fiber reinforced epoxy resin composites are the highest among the existing engineering materials, and the carbon fiber may be the strongest of all the low density synthetic handle materials. Carbon fiber is an impeccable raw material for bicycle stem which used under pressure and frequently twisted. Glossy carbon fiber bike stem is one of the most representative products among them.

Product Parameters

FAQ

Q1：How long is the bike stem that is suitable for me？

A：This is a question that is often mentioned by beginner riders. The answer to this question depends on both your body length and the way you use it.

First of all, the bike stem should not be too short, so as to ensure that the upper part of the body can be perfectly stretched without the feeling of shrinking into a ball. Make sure that there is a safe distance between the handlebar and your knee. Even when standing to ride, your knee will not hit the handlebar. This should be the bottom line of the stem's length.

Second, look at the way of use. As mentioned above, the longer the stem is, the more stretched the upper body is and the easier to exert force. However, the problem is that the center of gravity moves forward and the handling performance decreases. Short bike stem is the opposite.

In addition to the horizontal length, the vertical height difference between the bike stem and the seat cushion also has an impact. The height of the seat cushion is relatively easy to determine. The height difference between the bike stem and the seat cushion can be adjusted by using the front fork cushion ring or even reverse installation. The lower the bike stem, the easier it is to exert force, the worse the handling, and the greater the pressure on the neck and arms; The opposite is high stem place.

Q2:How to install the Carbon Fiber bike Stem?

A:Special attention should be paid to the sequence of tightening screws when installing the lathe stand.

The first step is to tighten the two screws of the stem and the front fork, and fix the bike stem slightly.

Step 2 is tighten the four screws connecting the handlebars of the bike stem. The locking sequence is the first is the upper left corner, the second is the lower right corner, the third is the upper right corner, and the last is the lower left corner. This cross locking method can make each screw evenly stressed, and also make the gap between the upper and lower parts of the car stand consistent, so as to ensure that the screws can still be evenly stressed during driving.

Finally, loosen the screw connecting the bike stem and the front fork, adjusting the angle of the handlebar to make the handlebar perpendicular to the front wheel. After the angle is adjusted properly, tighten the screws. The installation of the bike stem is completed.

          No matter what length of bike stem you choose, our company can accept carbon fiber bike stem customization of different specifications. If you want to customize carbon fiber bike stem, please contact us and we will reply to you as soon as possible.Send us the specific data of the bike stem: length, interface diameter, appearance and other requirements together, which can greatly improve efficiency.

Hot Tags: glossy carbon fiber bike stem, China, factory, suppliers, manufacturers, wholesale